Вход

Курсы валют

Казахстансих тенге

USD
427
EUR
497
RUB
5.93
9:00 - 18:00
Выходные
8 727 268-03-21
8 701 082-94-86
info@controllink.kz

Каталог


SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M DP Q PROFIBUS DP (DP, FS71, connector)

Изделие: 6SL3544-0TB02-1PA0


Краткое описание:
SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M DP Q PROFIBUS DP С ВСТРОЕННЫМ ТЕРМИНАЛОМ 4 DI, 2 DO, 2 AI, 1 F-DI PTC/ KTY - ПОДКЛЮЧЕНИЕ УПРАВЛЕНИЕ ТОРМОЗОМ ЗАЩИТА IP65 ОКРУЖ. ТЕМП. -10 ДО +55 ГРД C 105 X 171 X 216 (ВХШХГ) СOUT СИЛОВАЯ ЧАСТЬ
Производитель: SIEMENS
Интерфейс: PROFIBUS
Степени защиты IP: IP66
Вес: 2 кг.
Розничная цена: 246189
БЫСТРЫЙ ЗАКАЗ

The Control Unit performs closed-loop control functions for the inverter. In addition to the primary closed-loop control function, it has many additional functions that can be adapted to the particular application through parameterization.

The Control Units are available in two versions for connection to 400 V 3 AC and 24 V DC – screw-type or plug-in. The version in USS fieldbus communication is only available as screw-type. The differences between the screw-type and plug-in versions are presented in the following pictures:

SINAMICS G110M CU240M PN Control Unit cable gland

SINAMICS G110M CU240M PN Control Unit plug-in

Several Control Units are available in different versions:

Control Unit

 

Communications via

Connection system

For motor frame sizes

CU240M Control Unit, screw-type

CU240M

USS, Modbus RTU

Screw-type version

71, 80/90, 100/112

CU240M AS‑i Control Unit, screw-type

CU240M AS‑i

AS-Interface

Screw-type version

71, 80/90, 100/112

CU240M AS‑i Control Unit, plug-in

CU240M AS‑i

AS-Interface

Plug-in version

71, 80/90, 100/112

CU240M DP Control Unit, screw-type

CU240M DP

PROFIBUS

Screw-type version

71, 80/90, 100/112

CU240M DP Control Unit, plug-in

CU240M DP

PROFIBUS

Plug-in version

71, 80/90, 100/112

CU240M PN Control Unit, screw-type

CU240M PN

PROFINET, EtherNet/IP

Screw-type version

71, 80/90, 100/112

CU240M PN Control Unit, plug-in

CU240M PN

PROFINET, EtherNet/IP

Plug-in version

71, 80/90, 100/112

Safety Integrated functions

The safety function "Safe Torque Off" (STO 1)) (certified according to IEC 61508 SIL 2 and EN ISO 13849‑1 PL d and Category 3) is already integrated into the basic versions of the CU240M series (CU240M, CU240M DP and CU240M PN). It prevents active movement of the drive. It can be activated either over PROFIsafe or over the safety input.

Existing systems in particular can be simply updated with safety technology without the need to change the motor or mechanical system.

1) Available for firmware version V4.7 or higher

Дизайн

Интеграция

Connection diagram for CU240M Control Units

Connection diagram for CU240M AS-i Control Units

Connection diagram for CU240M DP Control Units

Connection diagram for CU240M PN Control Units

Технические данные

Control Unit

CU240M

CU240M AS-i

CU240M AS-i

CU240M

PROFIBUS

CU240M

PROFIBUS

CU240M

PROFINET

CU240M

PROFINET

 

Screw-type version

Screw-type version

Plug-in version

Screw-type version

Plug-in version

Screw-type version

Plug-in version

6SL3544...

-0LB02-1BA0
-0MB02-1BA0
-0NB02-1BA0

-0LB02-1MA0
-0MB02-1MA0
-0NB02-1MA0

-0TB02-1MA0
-0PB02-1MA0
-0QB02-1MA0

-0LB02-1PA0
-0MB02-1PA0
-0NB02-1PA0

-0TB02-1PA0
-0PB02-1PA0
-0QB02-1PA0

-0LB02-1FA0
-0MB02-1FA0
-0NB02-1FA0

-0TB02-1FA0
-0PB02-1FA0
-0QB02-1FA0

Electrical specifications

Operating voltage

External 24 V DC ± 15 % 
power supply with protective extra low voltage PELV acc. to EN 61800-5-1 must be used.

Current consumption 1)

(from the 24 V DC supply)

 

  • With Power Module frame size FSA

235 mA

290 mA

290 mA

235 mA

235 mA

290 mA

290 mA

  • With Power Module frame size FSB

235 mA

290 mA

290 mA

235 mA

235 mA

290 mA

290 mA

Interfaces

Digital inputs

(non-isolated)

4 programmable, PNP, SIMATIC compatible

  • Optionally parameterizable as safe inputs

1

Analog inputs

(0 ... 10 V or 0 ... 20 mA with 12-bit resolution)

2

Digital outputs

24 V DC (0 ... 0.5 A)

2, programmable

Bus interface

USS

AS-Interface

AS-Interface

PROFIBUS DP

PROFIBUS DP

PROFINET

PROFINET

  • Fieldbus protocols

USS
Modbus RTU

AS-Interface

AS-Interface

PROFIBUS DP incl. PROFIsafe

PROFIBUS DP incl. PROFIsafe

PROFINET incl. PROFIsafe
EtherNet/IP

PROFINET incl. PROFIsafe
EtherNet/IP

  • Profiles

3.0

3.0

PROFIdrive

PROFIdrive

PROFIdrive
PROFIenergy

PROFIdrive
PROFIenergy

PTC/KTY interface

(connection via Power Module)

✓ 

  • Motor temperature sensor

1 input, sensors that can be connected: PTC, KTY or bimetal

Control of a mechanical motor brake

(connection via the Control Unit)

✓ 

Slot for SINAMICS memory card (SD card)

✓ 

Commissioning interface (mini USB)

✓ 

Safety functions

Integrated safety functions 2)

acc. to IEC 61508 SIL 2 and EN ISO 13849‑1 PL d and Category 3

Safe Torque Off (STO)

Open-loop/closed-loop control techniques

V/f linear/quadratic/parameterizable

✓ 

V/f with flux current control (FCC)

✓ 

Vector control, sensorless

✓ 

Torque control, sensorless

✓ 

Software functions

Fixed frequencies

✓ 

Signal interconnection with BICO technology

✓ 

Automatic restart after line supply failure or operational fault

✓ 

Slip compensation

✓ 

Free function blocks (FFB) for logical and arithmetic operations

✓ 

Ramp smoothing

✓ 

Selectable drive data sets

✓ (4)

Selectable command data sets (CDS) (manual/auto)

✓ (4)

Flying restart

✓ 

JOG

✓ 

Cyclic recording of ramp-up and ramp-down

✓ 

Technology controller (PID)

✓ 

Quick stop

✓ 

Limit switch logic

✓ 

Thermal motor protection

✓ 

Thermal inverter protection

✓ 

Setpoint input

✓ 

Motor identification

✓ 

Motor holding brake

✓ 

Mechanical specifications and ambient conditions

Degree of protection 3)

IP66/UL Type 3

IP66/UL Type 12 (with wall mounting kit)

IP66/UL Type 3

IP66/UL Type 12 (with wall mounting kit)

IP65/UL Type 3

IP65/UL Type 12 (with wall mounting kit)

IP66/UL Type 3

IP66/UL Type 12 (with wall mounting kit)

IP65/UL Type 3

IP65/UL Type 12 (with wall mounting kit)

IP66/UL Type 3

IP66/UL Type 12 (with wall mounting kit)

IP65/UL Type 3

IP65/UL Type 12 (with wall mounting kit)

Operating temperature

-10 ... +55 ℃
(14 ... 131 °F)

Air temperature

-40 ... +70 °C
(40 ... 158 °F)

Relative humidity

<95 % RH,
condensation not permissible

Dimensions

 

  • Width

205 mm (8.07 in)

  • Height

105 mm (4.13 in)

  • Depth

171 mm (6.73 in)

Weight, approx.

1.75 kg (3.86 lb)

1.85 kg (4.08 lb)

1.85 kg (4.08 lb)

1.85 kg (4.08 lb)

1.85 kg (4.08 lb)

1.85 kg (4.08 lb)

1.85 kg (4.08 lb)


1) The current consumption of connected sensors (total, max. 200 mA) as well as the current drawn from the digital outputs (total, max. 500 mA).

2) Available for firmware version V4.7 or higher

3) Applies to Power Modules and Control Units in mounted state.

Похожие товары

SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M PN Q PROFINET (PN, FS80/90, connector)

Изделие: 6SL3544-0PB02-1FA0
SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M PN Q PROFINET С PLUG-IN TERMINALS 4 DI, 2 DO, 2 AI, 1 F-DI PTC/ KTY - ПОДКЛЮЧЕНИЕ УПРАВЛЕНИЯ ТОРМОЗОМ ЗАЩИТА IP65 ОКРУЖ. ТЕМП. -10 ДО +55 ГРД C 105 X 171 X 216 (ВХШХГ) СOUT СИЛОВАЯ ЧАСТЬ

Розничная цена: 246189
БЫСТРЫЙ ЗАКАЗ
SINAMICS G110M CONTROL UNIT CU240M AS-I G AS-INTERFACE (AS-i, FS100/112, glanded)

Изделие: 6SL3544-0NB02-1MA0
SINAMICS G110M CONTROL UNIT CU240M AS-I G AS-INTERFACE WITH GLAND MOUNTING FOR MOTOR FRAME SIZE 100/112 4 DI, 2 DO, 2 AI, 1 F-DI PTC/ KTY - CONNECTION EM BRAKE CONTROL PROTECTION IP66 AMBIENT TEMPERATURE -10 TO +55 105 X 205 X 171 (HXWXD) WITHOUT POWER MODULE

Розничная цена: 135219
БЫСТРЫЙ ЗАКАЗ
SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M DP Q PROFIBUS DP (DP, FS80/90, connector)

Изделие: 6SL3544-0PB02-1PA0
SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M DP Q PROFIBUS DP С PLUG-IN TERMINALS 4 DI, 2 DO, 2 AI, 1 F-DI PTC/ KTY - ПОДКЛЮЧЕНИЕ УПРАВЛЕНИЯ ТОРМОЗОМ ЗАЩИТА IP65 ОКРУЖ. ТЕМП. -10 ДО +55 ГРД C 105 X 171 X 216 (ВХШХГ) СOUT СИЛОВАЯ ЧАСТЬ

Розничная цена: 246189
БЫСТРЫЙ ЗАКАЗ
SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M PN G PROFINET (PN, FS100/112, glanded)

Изделие: 6SL3544-0NB02-1FA0
SINAMICS G110M МОДУЛЬ УПРАВЛЕНИЯ CU240M PN G PROFINET С M GLИS 4 DI, 2 DO, 2 AI, 1 F-DI PTC/ KTY - ПОДКЛЮЧЕНИЕ УПРАВЛЕНИЯ ТОРМОЗОМ ЗАЩИТА IP66 ОКРУЖ. ТЕМП. -10 ДО +55 ГРД C 105 X 171 X 205 (ВХШХГ) СOUT СИЛОВАЯ ЧАСТЬ

Розничная цена: 212076
БЫСТРЫЙ ЗАКАЗ

Наши услуги

36 реализованных проекта

Производители

PHH 600300589924
ИКК KZ87826A1KTD2014870
БИК ALMNKZKA AO "АТФ" Банка с Алматы
БИН 101040014805
Разработка сайта
ТОО «Control Link» | Республика Казахстан | г. Алматы | Ауэзовский район | ул. Толе Би | д. 302, Литер Д | офис № 205 Компания ТОО CONTROL LINK создана в 2010 г. как инжиниринговая компания с целью комплексных поставок и внедрения средств автоматизации технологических процессов (АСУ ТП), систем обеспечения связи, контроля и безопасности на объекте. Company Formation CONTROL LINK LLP was created in 2010 as an engineering company for the purpose of integrated supply and implementation of process automation (APCS) systems, communication, control and security at the facility.
РНН 600300589924 | ИИК KZ67826A1KZTD2014970 | БИК АLMNKZKA АО «АТФ Банк» | г.Алматы БИН 101040014805
Адрес:

г. Алматы, Ауэзовский район
ул. Толе Би 302, Литер "Д"
офис № 205

Телефон:

+7 (727) 268-0321
+7 (701) 082-9486
+7 (707) 493-7210

Факс:

+7 (727) 268-0321

Яндекс.Метрика