Вход

Курсы валют

Казахстансих тенге

USD
427
EUR
497
RUB
5.93
9:00 - 18:00
Выходные
8 727 268-03-21
8 701 082-94-86
info@controllink.kz

Каталог


SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU250S-2 PN, PROFINET, ПОДДЕРЖКА ВЕКТОРНОГО УПРАВЛЕНИЯ

Изделие: 6SL3246-0BA22-1FA0


Краткое описание:
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU250S-2 PN ВСТРОЕННЫЙ PROFINET ПОДДЕРЖКА ВЕКТОРНОГО УПРАВЛЕНИЯ, ПРОСТОЕ ПОЗИЦИОНИРОВАНИЕ EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6 DI (USABLE AS 3 F-DI), 5 DI, 3 DO (USABLE AS 1 F-DO), 2 AI, 2 AO SAFETY ВСТРОЕННЫЙ STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA EXTENDED SAFETY LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL PROTECTION IP20 USB- AND SD/MMC-INTERFACE
Производитель: SIEMENS
Интерфейс: PROFINET
Вес: 0.8 кг.
Розничная цена: 112614
БЫСТРЫЙ ЗАКАЗ

Обзор

Блоки управления CU230P-2, CU240B-2, CU240E-2, CU250S-2

Основное назначение компонента управления Sinamics G120 — обратная связь с инвертором и его контроль. Помимо этого на блоки CU240 могут быть возложены дополнительные задачи. Управляющие модули CU230 используются преимущественно для управления насосами, вентиляторами и компрессорами. Управляющие модули CU230P-2 могут использоваться для управления многими устройствами, в том числе транспортерами, мешалками, экструдерами, мельницы и т.п. Управляющие модули CU240B-2 имеют базовую функциональность и конфигурацию входов-выходов, встроенные интерфейсы USS, Modbus и PROFIBUS. Управляющие модули CU240E-2 имеют стандартную конфигурацию входов-выходов, а также встроенную технику безопасности и дополнительно интерфейс PROFINET. Управляющие модули CU250S-2 дают возможным подключение энкодеров двигателя, управление индукционными двигателями, реализацию задач позиционирования.

Для осуществления управления используются цифровые и аналоговые входы-выходы. Параметры настроек инвертора при необходимости можно сохранить на карте памяти ММС или SD.

В случае замены блока управления CU240 на более продвинутый блок CUA31 появляется возможность централизованного управления приводом при помощи платформы Simotion (с задействованием до 16,32,64 осей).

Example: CU230P-2 PN Control Unit

The CU230P-2 Control Units are designed for drives with integrated technological functions for pump, fan and compressor applications. The I/O interface, the fieldbus interfaces and the additional software functions optimally support these applications.

Note:

Shield plates and shield connection kits are available. These can be used in the wiring installation for the Control Units and PM230/PM240 Power Modules to ensure that it complies with EMC guidelines.
For further information, see Shield connection kits and shield plates for Control Units and Power Modules in section Supplementary system components.

PM330 Power Modules are supplied with the accessories needed to create an EMC-compliant wiring installation for Control Units and Power Modules. The Control Unit mounting surface on the Power Modules has mounting slots for shielding terminals.

Дизайн

 

CU230P‑2 HVAC, CU230P‑2 DP, CU230P‑2 PN and CU230P‑2 CAN Control Units

 

Example: CU230P‑2 Control Unit with open and closed terminal covers

Terminal No.

Signal

Features

Digital inputs (DI) – Standard

69

DI COM

Reference potential for digital inputs

5 ... 8.
16.17

DI0 … DI5

Freely programmable
isolated, inputs in compliance with IEC 61131-2

Digital outputs (DO)

18

DO0, NC

Relay output 1
NC contact (5 A, 30 V DC or 2 A, 250 V AC) 1)

19

DO0, NO

Relay output 1
NO contact (5 A, 30 V DC or 2 A, 250 V AC)

20

DO0, COM

Relay output 1
Common contact (5 A, 30 V DC or 2 A, 250 V AC) 1)

21

DO1, NO

Relay output 2
NO contact (0.5 A, 30 V DC)

22

DO1, COM

Relay output 2
Common contact (0.5 A, 30 V DC)

23

DO2, NC

Relay output 3
NC contact (5 A, 30 V DC or 2 A, 250 V AC) 1)

24

DO2, NO

Relay output 3
NO contact (5 A, 30 V DC or 2 A, 250 V AC)

25

DO2, COM

Relay output 3
Common contact (5 A, 30 V DC or 2 A, 250 V AC) 1)

Analog inputs (AI)

3

AI0+

Differential input, switchable between current and voltage
Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA

4

AI0-

10

AI1+

Differential input, switchable between current and voltage
Value range: 0 ... 10 V, -10 ... +10 V, 0/2 ... 10 V, 0/4 ... 20 mA

11

AI1-

50

AI2+

Non-isolated input, switchable between current and temperature sensors, type Pt1000/LG-Ni1000
Value range: 0/4 ... 20 mA,
Pt1000: -50 ... +250 °C
LG-Ni1000: -50 ... +150 °C

51

GND

Reference potential of the AI2/internal electronics ground

52

AI3+

Non-isolated input for temperature sensors, type Pt1000/LG-Ni1000
Value range:
Pt1000: -50 ... +250 °C
LG-Ni1000: -50 ... +150 °C

53

GND

Reference potential of the AI3/internal electronics ground

Analog outputs (AO)

12

AO0+

Non-isolated output
Freely programmable
Value range: 0 ... 10 V; 0/4 ... 20 mA

13

GND

Reference potential of the AO0/internal electronics ground

26

AO1+

Non-isolated output
Freely programmable
Value range: 0 ... 10 V; 0/4 ... 20 mA

27

GND

Reference potential of the AO1/internal electronics ground

Motor temperature sensor interface

14

T1 MOTOR

Positive input for motor temperature sensor
Type: PTC, KTY sensor, bimetal

15

T2 MOTOR

Negative input for motor temperature sensor

Power supply

9

+24 V OUT

Power supply output
24 VDC, max. 100 mA

28

GND

Reference potential of the power supply/internal electronics ground

1

+10 V OUT

Power supply output
10 V DC ±0.5 V, max. 10 mA

2

GND

Reference potential of the power supply/internal electronics ground

31

+24 V IN

Power supply input
20.4 ... 28.8 V DC, max. 1500 mA

32

GND IN

Reference potential of the power supply input

35

+10 V OUT

Power supply output
10 V DC ±0.5 V, max. 10 mA

36

GND

Reference potential of the power supply/internal electronics ground

1) The following applies to systems complying with UL: A maximum of 3 A, 30 V DC or 2 A, 250 V AC may be connected via terminals 18 / 20 (DO0 NC) and 23 / 25 (DO2 NC).

Функции

Below is a list of functions sorted according to the following categories:

Control modes
  • Linear and quadratic torque characteristic for fluid flow and positive displacement machines
  • ECO mode for additional energy saving in U/f control mode
  • Sensorless vector control for sophisticated control tasks and high-output motors
Connections
  • 2 analog inputs (current/voltage can be selected) to directly connect pressure/level sensors
  • 2 additional analog inputs to connect Pt1000/LG‑Ni1000 temperature sensors
  • Direct control of valves and flaps using two 230 V AC relays
Interfaces
  • PROFINET, EtherNet/IP, PROFIBUS, USS, BACnet MS/TP, P1 protocol, CANopen and Modbus-RTU communication
Software functions
  • Automatic restart function after power failure
  • Automatic restart
  • Flying restart
  • Skip frequencies
  • 1 PID controller for the closed-loop control of the motor speed as process controller for temperature, pressure, air quality or levels
  • 3 freely-programmable PID controllers
  • Sleep mode
  • Load check function to monitor belts and flow
  • Cascade connection
  • Multi-zone controller
  • Essential service mode
  • Real time clock with three time generators
IOP wizards for special applications with and without PID controller, such as
  • Pumps: Positive displacement (constant load torque) and centrifugal pumps (quadratic load torque)
  • Fans: Radial and axial fans (quadratic load torque)
  • Compressors: Positive displacement (constant load torque) and fluid flow machines (quadratic load torque)

Интеграция

Connection diagram for the CU230P‑2 Control Unit series

Communication interface USS, Modbus RTU, BACnet MS/TP, P1 protocol for CU230P‑2 HVAC

PROFIBUS DP communication interface

Communication interface PROFINET-EtherNet/IP

CANopen communication interface

Технические данные

Control Unit

CU230P‑2 HVAC

CU230P‑2 DP

CU230P‑2 PN

CU230P‑2 CAN

 

6SL3243-0BB30-1HA3

6SL3243-0BB30-1PA3

6SL3243-0BB30-1FA0

6SL3243-0BB30-1CA3

Electrical specifications

Operating voltage

24 V DC via the Power Module or by connecting to an external 20.4 ... 28.8 V DC power supply

Current consumption, max.

0.5 A

Protective insulation

PELV according to EN 50178
Protective separation from the line supply using double/reinforced insulation

Power loss, max.

5 W

Interfaces

Digital inputs – Standard

6 isolated inputs, optically isolated;
free reference potential (own potential group)

NPN/PNP logic can be selected using the wiring

  • Switching level: 0 → 1

11 V

  • Switching level: 1 → 0

5 V

  • Input current

5.5 mA

Digital outputs

3 relays

  • 2 relay changeover contacts

250 V AC, 2 A (inductive load)
30 V DC, 5 A (ohmic load)
The following applies to UL-compliant installations: A maximum of 3 A, 30 V DC or 2 A, 250 V AC may be connected via terminals 18 / 20 (DO0 NC) and 23 / 25 (DO2 NC).

  • 1 relay NO contact

30 V DC, 0.5 A (ohmic load)

Analog inputs

Analog inputs are protected against inputs in a voltage range of ± 30 V and have a common-mode voltage in the ± 15 V range

  • 2 differential inputs

Switchable with DIP switch between voltage and current:
-10 ... +10 V, 0/4 ... 20 mA, 12‑bit resolution

These differential inputs can be configured as additional digital inputs.
Switching thresholds:
0 → 1: Rated voltage 4 V
1 → 0: Rated voltage 1.6 V

  • 1 non-isolated input

Switchable with DIP switch between 0/4 ... 20 mA current and temperature sensor type Pt1000/LG‑Ni1000,
12‑bit resolution

  • 1 non-isolated input

Temperature sensor type Pt1000/LG‑Ni1000,
12‑bit resolution

Analog outputs

The analog outputs have short circuit protection

  • 2 non-isolated outputs

Switchable between voltage and current using parameter setting:
0 ... 10 V, 0/4 ... 20 mA

Voltage mode: 10 V, min. burden 10 kΩ
Current mode: 20 mA, max. burden 500 Ω

PTC/KTY interface

1 motor temperature sensor input,
sensors that can be connected PTC, KTY and bimetal,
accuracy ±5 °C

Bus interface

Fieldbus protocols

  • USS
  • Modbus RTU
  • BACnet MS/TP
  • P1 protocol (switchable using software)
  • PROFIBUS DP
  • PROFINET
  • EtherNet/IP
  • ODVA AC drive
  • SINAMICS profile
  • CANopen

Profile

  • PROFIdrive
  • PROFIdrive
  • PROFIenergy

Hardware

Plug-in terminal, insulated,
USS: max. 187.5 kBaud
Modbus RTU: 19.2 kBaud,
Bus terminating resistor that can be switched in

9-pin SUB-D socket, insulated,
Max. 12 Mbit/s
Slave address can be set using DIP switches

2 × RJ45, PROFIdrive profile V4.1, device name can be stored on the device

Max. 100 Mbit/s (full duplex)

9-pin SUB-D connector, insulated,
Max. 1 Mbit/s
Bus terminating resistor that can be switched in

 

Control Unit

CU230P‑2 HVAC

CU230P‑2 DP

CU230P‑2 PN

CU230P‑2 CAN

 

6SL3243-0BB30-1HA3

6SL3243-0BB30-1PA3

6SL3243-0BB30-1FA0

6SL3243-0BB30-1CA3

Tool interfaces

Memory card

SINAMICS SD card

Operator panels

 

  • Intelligent Operator Panel IOP

Can be directly plugged on

  • Basic Operator Panel BOP-2

Can be directly plugged on

  • Blanking cover

Required when no operator panel is plugged in order to achieve degree of protection IP55 on PM230 Power Modules degree of protection IP55/UL Type 12

PC interface

USB (connection via PC inverter connection kit 2)

Open-loop/closed-loop control techniques

U/f linear/quadratic/parameterizable

✓ 

U/f with flux current control (FCC)

✓ 

U/f ECO; linear/quadratic

✓ 

Vector control, sensorless

✓ 

Torque control, sensorless

✓ 

Software functions

Setpoint input

✓ 

Fixed frequencies

16, parameterizable

JOG

✓ 

Digital motorized potentiometer (MOP)

✓ 

Ramp smoothing

✓ 

Extended ramp-function generator (with ramp smoothing OFF3)

✓ 

Slip compensation

✓ 

Signal interconnection with BICO technology

✓ 

Free function blocks (FFB)

for logical and arithmetic operations

✓ 

Switchable drive data sets (DDS)

✓ (4)

Switchable command data sets (CDS)

✓ (4)

Flying restart

✓ 

Automatic restart

after line supply failure or operating fault (AR)

✓ 

Technology controller (internal PID)

✓ 

Sleep mode

with internal/external PID controller

✓ 

Belt monitoring

with and without sensor (load torque monitoring)

✓ 

Dry-running/overload protection monitoring

(load torque monitoring)

✓ 

Thermal motor protection

✓ (I2t, sensor: PTC/KTY/bimetal)

Thermal inverter protection

✓ 

Motor identification

✓ 

Auto-ramping (Vdcmaxcontroller)

✓ 

Kinetic buffering (Vdcmincontroller)

✓ 

Possible braking functions

  • DC braking (PM230, PM240, PM330, Cabinet)
  • Dynamic braking with integrated braking chopper and external braking resistor (PM240)
  • Dynamic braking with optional Braking Module and braking resistor (PM330, Cabinet)

 

Control Unit

CU230P‑2 HVAC

CU230P‑2 DP

CU230P‑2 PN

CU230P‑2 CAN

 

6SL3243-0BB30-1HA3

6SL3243-0BB30-1PA3

6SL3243-0BB30-1FA0

6SL3243-0BB30-1CA3

Mechanical specifications and ambient conditions

Degree of protection

IP20

Signal cable cross-section

0.15 ... 1.5 mm2 (AWG28 ... AWG16)

Operating temperature

For CU230P‑2 HVAC/DP/CAN: -10 ... 60 °C (14 ... 140 °F)

For CU230P‑2 PN: -10 ... 55 °C (14 ... 131 °F)

With IOP/BOP‑2: 0 ... 50 °C (32 ... 122 °F)

Derating of 3 K/1000 m applies to Control Units as of an installation altitude of 1000 m (3281 ft) above sea level.

Storage temperature

-40 ... +70 °C (-40 ... +158 °F)

Relative humidity

<95 % RH, condensation not permissible

Dimensions

 

  • Width

73 m (2.87 in)

  • Height

199 m (7.83 in)

  • Depth

65.5 mm (2.58)

Weight, approx.

0.61 kg (1.35 lb)

Похожие товары

SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU240E-2 ТИП E, ИНТЕГРИРОВАННЫЕ ФУНКЦИИ БЕЗОПАСНОСТИ STO ИНТЕРФЕЙС RS485, ПРОТОКОЛ USS

Изделие: 6SL3244-0BB12-1BA1
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU240E-2 ТИП E ИНТЕГРИРОВАННЫЕ ФУНКЦИИ БЕЗОПАСНОСТИ STO ИНТЕРФЕЙС RS485, ПРОТОКОЛ USS 6DI, 3DO, 2AI, 2AO, MAX 1F-DI PTC/KTY ИНТЕРФЕЙСЫ USB И SD/ ММC КЛАСС ЗАЩИТЫ: IP20 ТЕМП. ОКР. СРЕДЫ: ОТ 0 ДО +50 ГРАД. C БЕЗ СИЛОВОГО МОДУЛЯ

Розничная цена: 69870
БЫСТРЫЙ ЗАКАЗ
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU230P-2 CAN ВСТРОЕННЫЙ CANOPEN

Изделие: 6SL3243-0BB30-1CA3
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU230P-2 CAN ВСТРОЕННЫЙ CANOPEN 6 DI, 3 DO, 4 AI, 2 AO 1 ДАТЧИК ТЕМП. ДВИГАТЕЛЯ ВХОД 2 PSU-OUT(10V DC, 24V DC) 1 PSU-IN (24V DC) USB- AND MMC-ЗАЩИТА ИНТЕРФЕЙСА IP20

Розничная цена: 93297
БЫСТРЫЙ ЗАКАЗ
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU250S-2 CAN, ИНТЕРФЕЙС RS485 С USS-/MODBUS ПРОТОКОЛ RTU, ПОДДЕРЖКА ВЕКТОРНОГО УПРАВЛЕНИЯ

Изделие: 6SL3246-0BA22-1CA0
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU250S-2 CAN ВСТРОЕННЫЙ CANOPEN ПОДДЕРЖКА ВЕКТОРНОГО УПРАВЛЕНИЯ, ПРОСТОЕ ПОЗИЦИОНИРОВАНИЕ EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6 DI (USABLE AS 3 F-DI), 5 DI, 3 DO (USABLE AS 1 F-DO), 2 AI, 2 AO SAFETY ВСТРОЕННЫЙ STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA EXTENDED SAFETY LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL PROTECTION IP20 USB- AND SD/MMC-INTERFACE

Розничная цена: 118368
БЫСТРЫЙ ЗАКАЗ
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU250S-2 DP, PROFIBUS, ПОДДЕРЖКА ВЕКТОРНОГО УПРАВЛЕНИЯ

Изделие: 6SL3246-0BA22-1PA0
SINAMICS G120 БЛОК УПРАВЛЕНИЯ CU250S-2 DP ВСТРОЕННЫЙ PROFIBUS ПОДДЕРЖКА ВЕКТОРНОГО УПРАВЛЕНИЯ, ПРОСТОЕ ПОЗИЦИОНИРОВАНИЕ EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6 DI (USABLE AS 3 F-DI), 5 DI, 3 DO (USABLE AS 1 F-DO), 2 AI, 2 AO SAFETY ВСТРОЕННЫЙ STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA EXTENDED SAFETY LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL PROTECTION IP20 USB- AND SD/MMC-INTERFACE

Розничная цена: 112614
БЫСТРЫЙ ЗАКАЗ

Наши услуги

36 реализованных проекта

Производители

PHH 600300589924
ИКК KZ87826A1KTD2014870
БИК ALMNKZKA AO "АТФ" Банка с Алматы
БИН 101040014805
Разработка сайта
ТОО «Control Link» | Республика Казахстан | г. Алматы | Ауэзовский район | ул. Толе Би | д. 302, Литер Д | офис № 205 Компания ТОО CONTROL LINK создана в 2010 г. как инжиниринговая компания с целью комплексных поставок и внедрения средств автоматизации технологических процессов (АСУ ТП), систем обеспечения связи, контроля и безопасности на объекте. Company Formation CONTROL LINK LLP was created in 2010 as an engineering company for the purpose of integrated supply and implementation of process automation (APCS) systems, communication, control and security at the facility.
РНН 600300589924 | ИИК KZ67826A1KZTD2014970 | БИК АLMNKZKA АО «АТФ Банк» | г.Алматы БИН 101040014805
Адрес:

г. Алматы, Ауэзовский район
ул. Толе Би 302, Литер "Д"
офис № 205

Телефон:

+7 (727) 268-0321
+7 (701) 082-9486
+7 (707) 493-7210

Факс:

+7 (727) 268-0321

Яндекс.Метрика