Control Link - Time-based IO module TM Timer DIDQ 16x24V

Каталог

Наши услуги

РЕШЕНИЯ

Техническое зрение

Time-based IO module TM Timer DIDQ 16x24V

Изделие: 6ES7552-1AA00-0AB0

Краткое описание:

SIMATIC S7-1500, ТЕХНОЛОГИЧЕСКИЙ МОДУЛЬ TM TIMER DIDQ 16X24V, МОДУЛЬ ТАЙМЕРА, ДИСКРЕТНЫЕ ВХОДЫ И ВЫХОДЫ (МАКС. 8DI, МАКС. 16DQ) С ПОДДЕРЖКОЙ ВРЕМЕННЫХ ФУНКЦИЙ И МЕТКОЙ ВРЕМЕНИ, СЧЁТА, ШИМ, ПЕРЕДИСКРЕТИЗАЦИЕЙ

Производитель: SIEMENS
Вес: 0.43 кг.

Цена по запросу.

БЫСТРЫЙ ЗАКАЗ

Order number		6ES7552-1AA00-0AB0
		S7-1500, TM TIMER DIDQ 16X24V
Product type designation
General information
Product function
● I&M data		Yes; I&M 0
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version		V13 Update 3
Installation type/mounting
Rail mounting possible		Yes; S7-1500 mounting rail
Load voltage 1L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		19.2 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; against destruction
Load voltage 2L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		19.2 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; against destruction
Input current
from load voltage 1L+ (without load), max.		40 mA; without load
from load voltage 2L+ (without load), max.		30 mA; without load
Encoder supply
Number of outputs		8; max. depending on parameterization
24 V encoder supply
● 24 V		Yes
● short-circuit protection		Yes
● Output current, max.		1.2 A
Power
Power available from the backplane bus		1.3 W
Power loss
Power loss, typ.		5 W
Digital inputs
Number of digital inputs		8; max. depending on parameterization
● in groups of		8
Digital inputs, parameterizable		Yes
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Digital input functions, parameterizable
● Digital input with time stamp		Yes
— Number, max.		8
● Counter		Yes
— Number, max.		4
● Counter for incremental encoder		Yes
— Number, max.		4
● Digital input with oversampling		Yes
— Number, max.		8
● HW enable for digital input		Yes
— Number, max.		4
● HW enable for digital output		Yes
— Number, max.		4
Input voltage
● Type of input voltage		DC
● Rated value (DC)		24 V
● for signal "0"		-30 to +5V
● for signal "1"		+11 to +30V
● permissible voltage at input, min.		-30 V
● permissible voltage at input, max.		30 V
Input current
● for signal "1", typ.		2.5 mA
Input delay (for rated value of input voltage)
● Minimum pulse width for program reactions		3 µs for parameterization "none"
for standard inputs
— Parameterizable		Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms
— at "0" to "1", min.		4 µs; for parameterization "none"
— at "1" to "0", min.		4 µs; for parameterization "none"
Cable length
● shielded, max.		1 000 m; Depending on sensor, cable quality and rate of change
● unshielded, max.		600 m; Depending on sensor, cable quality and rate of change
Digital outputs
Type of digital output		Transistor
Number of digital outputs		16; max. depending on parameterization
● in groups of		8
Current-sinking		Yes; With High Speed output
Current-sourcing		Yes
Digital outputs, parameterizable		Yes
short-circuit protection		Yes; electronic/thermal
Controlling a digital input		Yes
Digital output functions, parameterizable
● Digital output with time stamp		Yes
— Number, max.		16
● PWM output		Yes
— Number, max.		16
● Digital output with oversampling		Yes
— Number, max.		16
Switching capacity of the outputs
● with resistive load, max.		0.5 A; 0.1 A with High Speed output
● on lamp load, max.		5 W; 1 W with High Speed output
Load resistance range
● lower limit		48 Ω; 240 ohm with High Speed output
● upper limit		12 kΩ
Output voltage
● Type of output voltage		DC
● for signal "0", max.		1 V; With High Speed output
● for signal "1", min.		23.2 V; L+ (-0.8 V)
Output current
● for signal "1" rated value		0.5 A; 0.1 A with High Speed output, observe derating
● for signal "0" residual current, max.		0.5 mA
Output delay with resistive load
● "0" to "1", max.		1 µs; With High Speed output, 5 µs with Standard output
● "1" to "0", max.		1 µs; With High Speed output, 6 µs with Standard output
Switching frequency
● with resistive load, max.		10 kHz
● on lamp load, max.		10 Hz
Total current of the outputs
● Current per group, max.		4 A
● Current per module, max.		8 A; Observe derating
Cable length
● shielded, max.		1 000 m; Depending on load and cable quality
● unshielded, max.		600 m; Depending on load and cable quality
Encoder
Connectable encoders
● Incremental encoder (asymmetrical)		Yes
● 24 V initiator		Yes
● 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1.5 mA
Encoder signals, incremental encoder (asymmetrical)
● Input voltage		24 V
● Input frequency, max.		50 kHz
● Counting frequency, max.		200 kHz; with quadruple evaluation
● Cable length, shielded, max.		600 m; Depending on input frequency, encoder and cable quality; max. 200 m at 50 kHz
● Incremental encoder with A/B tracks, 90° out of phase		Yes
● Pulse encoder		Yes
Encoder signal 24 V
— permissible voltage at input, min.		-30 V
— permissible voltage at input, max.		30 V
Interface types
● Input characteristic curve in accordance with IEC 61131, type 3		Yes
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes
Bus cycle time (TDP), min.		250 µs
Interrupts/diagnostics/status information
Substitute values connectable		Yes
Alarms
● Diagnostic alarm		Yes
Diagnostic messages
● Diagnostics		Yes
● Monitoring the supply voltage		Yes
● Short-circuit		Yes
Diagnostics indication LED
● RUN LED		Yes; Green LED
● ERROR LED		Yes; Red LED
● MAINT LED		Yes; yellow LED
● Monitoring of the supply voltage (PWR-LED)		Yes; Green LED
● Channel status display		Yes; Green LED
● for channel diagnostics		Yes; Red LED
Integrated Functions
Number of counters		4
Counting frequency (counter) max.		200 kHz; with quadruple evaluation
Counting functions
● Continuous counting		Yes
Potential separation channels
● between the channels and the backplane bus		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC (base isolation)
Isolation
Isolation tested with		707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.		0 °C
● horizontal installation, max.		60 °C
● vertical installation, min.		0 °C
● vertical installation, max.		40 °C; Observe derating
Decentralized operation
to SIMATIC S7-1500		Yes
Dimensions
Width		35 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		320 g

	6ES7528-0AA00-7AA0 SIMATIC S7-1500, ЗАПЧАСТЬ - ФРОНТАЛЬНАЯ ДВЕРЦА ДЛЯ МОДУЛЕЙ ВВОДА-ВЫВОДА. В КОМПЛЕКТЕ ПОСТАВКИ: * - ФРОНТАЛЬНАЯ ДВЕРЦА (НЕМАРКИРОВАННАЯ), * МЕТКА (ПЕРЕДНЯЯ), * СХЕМА ПОДКЛЮЧЕНИЯ, 5 ШТ. В УПАКОВКЕ Packaging Quantity (piece): 5
	6ES7590-0AA00-0AA0 SIMATIC S7-1500, ЗАПЧАСТЬ, U-ОБРАЗНЫЙ СОЕДИНИТЕЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ МОДУЛЕЙ ВВОДА-ВЫВОДА (САМОКОНФИГУРИРУЕМАЯ ЗАДНЯЯ ШИНА) 5 ШТ. В УПАКОВКЕ Packaging Quantity (piece): 5
	6ES7590-5BA00-0AA0 SIMATIC S7-1500, ЗАПЧАСТЬ - КЛЕММА ЗАЗЕМЛЕНИЯ ДЛЯ АНАЛОГОВЫХ И ТЕХНОЛОГИЧЕСКИХ МОДУЛЕЙ. БЕЗ РАМКИ ЗАЗЕМЛЕНИЯ И БЕЗ ВВОДНОГО АДАПТЕРА ПИТАНИЯ =24 В, 5 ШТ. В УПАКОВКЕ Packaging Quantity (piece): 5
	6ES7590-5CA00-0AA0 SIMATIC S7-1500, ЗАПЧАСТЬ - ЗАЗЕМЛЯЮЩИЙ НАБОР. ВС СОСТАВЕ: * КЛЕММА ЗАЗЕМЛЕНИЯ * РАМКА ЗАЗЕМЛЕНИЯ * ВВОДНОЙ АДАПТЕР ПИТАНИЯ =24 В, ВИНТОВОЕ ПОДКЛЮЧЕНИЕ. ПРИГОДЕН ДЛЯ ВСЕХ АНАЛОГОВЫХ И ТЕХНОЛОГИЧЕСКИХ МОДУЛЕЙ, ДЛЯ МОДУЛЕЙ ШИРИНОЙ 35 ММ, ДЛЯ ВСЕХ ФРОНТШТЕКЕРОВ, 5 ШТ. В УПАКОВКЕ Packaging Quantity (piece): 5
	6ES7592-1AM00-0XB0 SIMATIC S7-1500, ФРОНТШТЕКЕР С ВИНТОВЫМ ПОДКЛЮЧЕНИЕМ, 40-ПОЛЮСНЫЙ, ДЛЯ МОДУЛЕЙ ШИРИНОЙ 35 ММ, В КОМПЛЕКТЕ 4 МОСТИКА И КАБЕЛЬНАЯ СТЯЖКА
	6ES7592-1BM00-0XB0 SIMATIC S7-1500, ФРОНТШТЕКЕР С ПОДКЛЮЧЕНИЕМ PUSH-IN, 40-ПОЛЮСНЫЙ, ДЛЯ МОДУЛЕЙ ШИРИНОЙ 35 ММ, В КОМПЛЕКТЕ 4 МОСТИКА И КАБЕЛЬНАЯ СТЯЖКА
	6ES7592-2AX00-0AA0 SIMATIC S7-1500, МАРКИРОВОЧНЫЕ ЛИСТЫ ДЛЯ МОДУЛЕЙ S7-1500 ШИРИНОЙ 35 ММ; ЦВЕТ: АЛЮМИНИЕВО-СЕРЫЙ; МАТЕРИАЛ: МЕМБРАНА, ПЕРФОРИРОВАНЫ, ДЛЯ ПРИМЕНЕНИЯ СО СТАНДАРТНЫМИ ЛАЗЕРНЫМИ ПРИНТЕРАМИ; 10 ЛИСТОВ ПО 10 МЕТОК КАЖДЫЙ В УПАКОВКЕ - ДОСТАТОЧНО ДЛЯ 100 МОДУЛЕЙ Packaging Quantity (piece): 10

Обзор

8 digital inputs, 16 digital outputs, of which up to 16 can be used in different configurations as technological, time-controlled channels
Inputs for detecting the input edges with µs accuracy
Outputs for outputting switching signals with µs accuracy
32x oversampling
PWM output
Counter function
Outputs can be switched between 0.5 A standard and especially fast 0.1 A high-speed operation

Область применения

Time-based IO modules read in switching edges at digital inputs with a high time resolution, and supply time information, as well as the status, to the CPU.

For the digital outputs, switching commands with additional time information are transferred from the CPU. The outputs switch at a pre-defined time.

The modules can be used for diverse applications requiring accuracy below the resolution of the PLC or bus cycle. This requires no more than storage of the relevant instructions in the controller.

The following time-based I/O modules are available:

Timer DIDQ 16x24V
Time-controlled timer module with 8 inputs and 16 outputs, of which up to 16 with time stamp function; counter function up to 50 kHz, oversampling, pulse width modulation;
requires isochronous mode

Дизайн

Installation on the S7-1500 mounting rail using one single screw
Standardized 40-pin front connector
Connectable core cross-sections: 0.25 mm² to 1.5 mm² (AWG24 to 16)
Prewiring position of the front connector
Front flap with expandable cable compartment, even if fully wired
Integrated shielding concept

Included in the scope of delivery:

One labeling strip for manual labeling
One U connector
Printed front door
Shield clamp, and shield terminal

Функции

Uniform display and diagnostics concept:
- Module status display for ERROR (red LED) and RUN (green LED)
- Channel status indicator for signal state log. "0" and log. "1" (green LED) or diagnostics display (red LED)
- Display for monitoring the 24 V DC supply voltage (green LED)
Supported functions:
- Inputs with time tagging (requires isochronous mode)
- Outputs with time tagging (requires isochronous mode)
- 32x oversampling of the inputs (requires isochronous mode)
- 32x oversampling of the outputs (requires isochronous mode)
- Counter for 1 track or 2 tracks with 90° phase-shifted signal (does not require isochronous mode)
- Pulse width modulation (does not require isochronous mode)
- Inputs can be used as an enabler for inputs or outputs
- Isochronous mode
Uniform system functions of SIMATIC S7-1500 and ET 200MP:
- Identification and maintenance data IM0
- Firmware update
- Unambiguous labeling on front of module
- Uniform front connector

Курсы валют

Каталог

Наши услуги

Преобразователи частоты

Time-based IO module TM Timer DIDQ 16x24V

Изделие: 6ES7552-1AA00-0AB0

Обзор

Область применения

Дизайн

Функции

Похожие товары

Наши услуги

Производители